| One-touch installation. Direct fixed amount dispensing |
|---|
AUTOTUBE |
Anyone can easily apply silicone-based or solvent-based adhesives in tubes or cartridges using air pressure and power. Can be used with 0.5mpa air and 100 (200) V power supply. Since it uses air pressure, your hands won't get tired and work efficiency will increase. It is possible to quantitatively control the application amount using a dedicated controller.
- High-precision coating possible using a minimum 0.25mm nozzle
- Excellent liquid drainage
- Significant cost reductions are realized as the liquid is squeezed out without wasting it.
- Commercially available adhesive types can be selected according to usage conditions.
ATD300CV-DAV Auto tube set with valve
Autotube with valve ATD300CV-DAV enables stable liquid application without dripping when combined with piston valve SV35DA. Installed on the tabletop coating robot SR series to apply silicone quantitatively with higher precision.
| Electronic parts | Fixing capacitors, coils, etc. on the board, etc. |
| precision machinery | Grease application, general manual tube/cartridge liquid application work, etc. |
| Medical equipment | |
| Automobile |
Autotube standard set
For 100g/200g tubes: ATD200CW-B (standard set)
For 330g cartridge: ATD300CB-B (standard set)
For 100/200g tube liquid ATD200CW-B
| Product number | Product name |
|---|---|
| SDP400 | dispense controller |
| SD314 | AC adapter |
| FTSW001 | Foot pedal switch (2.4m cord) |
| Consumable accessories (SH110-TK) |
Tapered nozzle (5 types of various gauges x 10 each) Tip cap (10 pieces) |
| SAR20RAT | 100/200g tube holder |
| SAR20RC | 100/200g holding cap |
| SAR59 | air hose |
| 7514-2 | tip adapter |
| *880001A.B | Adapter A/B 2 each |
For 330g cartridge ATD300CB-B
| Product number | Product name |
|---|---|
| SDP400 | dispense controller |
| SD314 | AC adapter |
| FTSW001 | Foot pedal switch (2.4m cord) |
| Consumable accessories |
Tapered nozzle (5 types of various gauges x 10 each) Tip cap (10 pieces) |
| 880012A | 2 big taper nozzles |
| 580091 | 330g outer container set (with holding cap and air hose) |
| 7514-2 | tip adapter |
| 7514-2PA | Adapter for big taper nozzle |
| 880003A | cartridge adapter |
| 880003B | cartridge adapter |
