01 | |
---|---|
TLC Teflon nozzle |
Ideal for applying instant adhesives and solvents that harden quickly and are prone to clogging.
gauge |
Tip Teflon outer diameter (Mm) |
Tip Teflon inner diameter (Mm) |
Needle outer diameter (Mm) |
Needle length | Color | Number/box | |
---|---|---|---|---|---|---|---|
16.5 mm | 29.2 mm | ||||||
21 | 1.18 | 0.68 | 1.65 | SH21TLCS-B | SH21TLC-B | gray | 50 |
25 | 0.76 | 0.30 | 1.27 | SH25TLCS-B | SH25TLC-B | Pink | 50 |
Hub material: Polypropylene Needle material: Stainless steel Inside needle: Teflon (peelable)
02 | |
---|---|
oval nozzle |
Ideal for drawing medium to high viscosity liquids into ribbons.
Approximately 2mm width coating possible
gauge | Needle length | Color | Number/box |
---|---|---|---|
12.7 mm | |||
15 | SH15OVAL-B | amber | 50 |
Discharge port diameter (inner dimension): 1.98 x 0.41mm
Hub material: Polypropylene Needle material: Stainless steel
03 | |
---|---|
brush nozzle |
Can be applied thinly and uniformly over a wide area without damaging the surface of the workpiece. The brush material is made of nylon and comes in two types: soft and hard.
Brush hardness | M | High flow type |
---|---|---|
soft | SH40A | SH40HF |
hard | SH41A | SH41HF |
Order unit: 1 brush brush material: nylon
04 | |
---|---|
multi nozzle |
Multi-needle nozzle ideal for dispensing medium to high viscosity liquids Number of needles and needle length can be selected Multi-chamfer nozzle has a tapered needle tip