| Weight/Size | 接 続 | Wetted parts material | maximum hydraulic pressure | For flow rate adjustment Stroke Adjustment mechanism |
|
|---|---|---|---|---|---|
| 334g φ26.9 mm x 141 mm |
Supply port: 1/8NPT (Dedicated nozzle) Mounting hole: M6 tap hole |
UHMW stainless |
0.7MPa | There | |
| 312g φ26.9mm (liquid chamber part) x 143mm |
Supply port: 1/8NPT female thread Mounting hole: M6 female thread |
SUS303 | 0.7MPa | There |
| 01 | Valve for substrate coating that can control high viscosity materials with less scattering. |
|---|---|
SV70 |
The SV70 conformal coating valve is equipped with a unique square nozzle that allows for a wide range of coatings at low flow rates. It achieves a stable coating trajectory without scattering, and its high-speed response enables high-speed tact and excellent liquid drainage even when coating in multiple extreme locations. (Not compatible with circulating liquid temperature control system)
・Reduced liquid clogging due to rectangular nozzle diameter
・Using carbide material, stable discharge is possible over a long period of time.
・Equivalent diameter nozzle enables low flow rate and wide pattern formation
・Achieves high-dimensional coating with high precision and no scattering
| 02 | Valve for substrate coating that can control high viscosity materials with less scattering. |
|---|---|
SV01CS |
The SV01CS spray valve for substrate coating is capable of spraying low to high viscosity liquids up to approximately 10,000mPa(s).
