Ultra high-speed, consistent micro-dispensing increases yields and production efficiency
HYPERDOT provides non-contact, high-speed jetting at a rate up to 300 drops/second and exceptional volumetric control for a variety of fluid viscosities ranging from middle to high viscosity (up to 400K mPa.s).
| Size | Dispensing valve
SJVH5000 |
Dispensing controller SJVC5000 |
|
|---|---|---|---|
| Width | 25.4 mm | 254.0 mm | |
| Height | 90.3 mm | 152.5 mm | |
| Depth | 82.0 mm | 341.4 mm | |
| Weight | 348 g | 3200 g | |
| Power | AC100/220V 50/60Hz | ||
| Input consumption current | 0.9A/100W | ||
| Muxmum inlet pressure | 0.69 MPa | ||
| Viscosity range | 1-400Pa・s （400Kcps） | ||
| Speed | Up to 300Hz | ||
| Nozzle heater | Heating up to 70℃ – Max | ||
| Ambient operating condition | 5℃〜40℃(non-condensing) | ||
| Nozzle size (special) | 5, 10, 30, 55 cc | ||
| Fluid syringes | 5, 10, 30, 55 cc | ||
| Controller interface | ・LCD Display with keypad ・RS-232 Serial Port |
||
| Input/Output | Dsub26 pin connector、RS-232 Serial Port | ||
Diagram
