back

Dispensing Components

GP needle tips

Dispensing Components

01

GP needle tips

A wide variety of needle lengths and diameters can be selected for general application. Burr-free, polished tips provide consistent fluid flow.

GP needle tips
Gauge ID size
mm (in)
OD size mm (in) Needle length Hub color mm (in)
Pcs per box
6.4mm
(0.25″)
12.7mm
(0.5″)
25.4mm
(1″)
38.1mm
(1.5″)
14
1.55(.061″) 1.83(.072″) SH14-0.25-B SH14-B   SH14-1-B SH14-1.5-B olive 50
15 1.37(.054″) 1.65(.065″) SH15-0.25-B SH15-B SH15-1-B SH15-1.5-B amber
50
18 0.91(.036″) 1.27(.050″) SH18-0.25-B SH18-B SH18-1-B SH18-1.5-B green 50
20 0.61(.024″) 0.91(.036″) SH20-0.25-B SH20-B SH20-1-B SH20-1.5-B pink   50
21 0.51(.020″) 0.81(.032″) SH21-0.25-B SH21-B SH21-1-B SH21-1.5-B purple 50
22 0.41(.016″) 0.71(.028″) SH22-0.25-B SH22-B SH22-1-B SH22-1.5-B blue 50
23 0.33(.013″) 0.64(.025″) SH23-0.25-B SH23-B SH23-1-B SH23-1.5-B orange 50
25 0.25(.010″) 0.51(.020″) SH25-0.25-B SH25-B SH25-1-B SH25-1.5-B red
50
27 0.21(.008″) 0.41(.016″) SH27-0.25-B SH27-B clear  50
30 0.16(.006″) 0.31(.012″) SH30-0.25-B SH30-B lavender 50
32 0.11(.004″) 0.23(.009″) SH32-0.25-B yellow 25

hub:polypropylene
shaft:304 stainless steel

02

TT tapered tips

TT tapered tip provides smooth flow minimizing air entrapment. Gel-type cyanoacrylate adhesives can also be applied.

TT tapered tips
Gauge ID size
mm (in)
Material Color Pcs per
box
standard opaque rigid
14 1.55(.061″) SH14TT-B SH14RTT-B olive  50
16 1.19(.047″) SH16TT-B SH16RTT-B gray 50
18 0.84(.033″) SH18TT-B SH18RTT-B green 50
20 0.61(.024″) SH20TT-B SH20RTT-B pink 50
22 0.41(.016″) SH22TT-B SH22RTT-B blue 50
25 0.25(.010″) SH25TT-B SH25RTT-B red 50

standard:polyethylene
opaque rigid:polypropylene

03

Angled tips

Angled shaft shaft allows for reaching under or inside workpiece.
Available with 45°and 90°bends and 10 different tip diameters ranging from 14 to 30 gauge.

Angled tips
Gauge ID size
mm (in)
OD size
mm (in)
Needle length Hub
color
Pcs per
box
12.7mm/45° (0.5″) 12.7mm/90° (0.5″)
14 1.55(.061″) 1.83(.072″) SH14-B-45 SH14-B-90 olive 50
15 1.37(.054″) 1.65(.065″) SH15-B-45 SH15-B-90 amber 50
18 0.91(.036″) 1.27(.050″) SH18-B-45 SH18-B-90 green 50
20 0.61(.024″) 0.91(.036″) SH20-B-45 SH20-B-90 pink 50
21 0.51(.020″) 0.81(.032″) SH21-B-45 SH21-B-90 purple 50
22 0.41(.016″) 0.71(.028″) SH22-B-45 SH22-B-90 blue 50
23 0.33(.013″) 0.64(.025″) SH23-B-45 SH23-B-90 orange 50
25 0.25(.010″) 0.51(.020″) SH25-B-45
SH25-B-90 red 50
27 0.21(.008″) 0.41(.016″) SH27-B-45 SH27-B-90 clear 50
30 0.16(.006″) 0.31(.012″) SH30-B-45 SH30-B-90 lavender 50

hub:polypropylene
shaft:304 stainless steel

04

PP flexible tips

Polypropylene shaft reaches into hard-to-access areas and will not scratch delicate surfaces.

PP flexible tips
Gauge ID size
mm (in)
OD size
mm (in)
Needle length Hub
color
Pcs per
box
12.7mm(0.5″) 38.1mm(1.5″)
15 1.35(.053″) 1.65(.065″) SH15PPS-B SH15PP-B amber 50
18 0.80(.032″) 1.21(.048″) SH18PPS-B SH18PP-B green 50
20 0.47(.019″) 0.85(.033″) SH20PPS-B SH20PP-B pink 50
25 0.40(.016″) 0.80(.032″) SH25PPS-B SH25PP-B red 50

hub:polypropylene
shaft:polypropylene

05

Chamfered tips

Precision chamfering minimizes surface contact area of wetted tip for dispensing microdots with low viscosity fluids.

Chamfered tips
Gauge ID size
mm (in)
OD size
mm (in)
Needle length Hub
color
Pcs per box
6.4mm
(0.25″)
7.0mm
(0.28″)
9.5mm
(0.37″)
12.7mm
(0.5″)
23 0.34(.013″) 0.64(.025″) SH23CH-B orange  50
25 0.26(.010″) 0.51(.020″) SH25CH-B red 50
27 0.21(.008″) 0.41(.016″) SH27CH-0.25-B clear 25
30 0.17(.007″) 0.51(.020″) SH30CH-B red 25
33 0.11(.004″) 0.41(.016″) SH33CH-B clear 25

hub:polypropylene
shaft:304 stainless steel

06

TLC PTFE-lined tips

PTFE inner lining inside shaft resists clogging of cyanocrylates.

TLC PTFE-lined tips
Gauge ID size
mm (in)
OD size
mm (in)
Needle
OD size
mm(in)
Needle length Hub color Pcs per
box
16.5mm 29.2mm
21 0.68(.027″) 1.18(.046″) 1.65(.065″) SH21TLCS-B SH21TLC-B gray 50
25 0.30(.012″) 0.76(.030″) 1.27(.050″) SH25TLCS-B SH25TLC-B pink 50

hub: Polypropylene
shaft: 304 stainless steel
inner lining: PTFE (low surface energy)

07

Brush tips

Nylon bristles will not damage work surfaces and are best for spreading glues and greases. Available in soft or stiff bristles.

Brush tips
Style Standard High flow
soft SH40A SH40HF
stiff SH41A SH41HF

bristle: nylon

08

Metal needle tips

13mm tip is the standard length with other customized lengths available.

Metal needle tips
Part number ID size mm (in) OD size mm (in) Pcs per box
SSN-20 0.65(.026″) 0.89(.035″) 12
SSN-21 0.53(.021″) 0.81(.032″) 12
SSN-22 0.47(.019″) 0.71(.028″) 12
SSN-23 0.38(.015″) 0.64(.025″) 12
SSN-24 0.34(.013″) 0.56(.022″) 12
SSN-25 0.33(.013″) 0.51(.020″) 12
SSN-26 0.25(.010″) 0.45(.018″) 12
SSN-27 0.21(.008″) 0.41(.016″) 12
SSN-28 0.18(.007″) 0.38(.015″) 12

shaft neck: nickel plated, shaft: 304 stainless steel

09

Metal nozzles(one per unit)

High precision nozzle machined as a single component provides smooth fluid flow.

Metal nozzles(one per unit)
Part number ID size mm (in) OD size mm (in)
SPN-40 0.40(.016″) 0.50(.020″)
SPN-35 0.35(.014″) 0.45(.018″)
SPN-30 0.30(.012″) 0.40(.016″)
SPN-25 0.25(.010″) 0.35(.014″)
SPN-20 0.20(.008″) 0.30(.012″)
SPN-15 0.15(.006″) 0.25(.010″)
SPN-10 0.10(.004″) 0.20(.008″)

shaft neck: nickel plated, shaft: 304 stainless steel

10

Super-Fine ceramic nozzles (one per unit)

Double-threaded-screw type nozzle ensures secure attachment to a syringe ensuring excellent air tightness.
Nozzle sizes can be manufactured in increments of 5μm from a nozzle inner diameter of 0.005mm

Metal nozzles(one per unit)

shaft neck: 303
stainless steel spacer (between shaft neck and shaft): 303 stainless
steel shaft: ceramic (zirconia) )
shaft neck: double-threaded screw

11

Multiple nozzle manifold tips

Best for applications of medium to high viscosity fluids. Different numbers of nozzles and lengths are available. Multiple chamfered nozzles with tapered tips are also available.

Multiple nozzle manifold tips
  • movies

© 2023 SAN-EI TECH Ltd. All Rights Reserved.